Belt Lacing System Accessories

Belt Lacing System Accessories include:

• Belt Lacing Tools
• Connecting Pins
• Additional Products


Belt Lacing Tools
To Suit HD U60, U30, S30, E30

Manual:
•  Advancing and fastening system is performed manually.
•  The screw clamping frames are available in various sizes to suit    the required belt width.

Pneumatic:
•  Advancing is performed manually and fastener installation is    performed pneumatically.
•  The screw clamping frames are available in various sizes to suit    the required belt width.

Belt Lacing Tools
To Suit H30 Hammer Tool

• The tool bed is lightweight making it easy to carry.  The punch and holder are easy to operate and designed to give long service life.  The tool will install H35A and H37 fasteners by simply turning the belt stop pins.  The fastener strip is installed by locating onto the belt stop pins and secured by positioning the retaining rod through the holes in the belt stop pins.
• Standard sizes are available for belt widths 900, 1050, 1200, and 1350mm.  Other sizes are available upon request.

Belt Lacing Tools
To Suit MS

•  The installation templates are available in a range of belt sizes          600, 800, 1050, 1200 and 1500mm
Hand Nut Tightener
 •  Useful in confined areas.

 
Brace Nut Tightener
•  A complete range of tools is available including power tools.
Belt Punch
 •  For punching out the bolt holes.  The punched out belt plugs are    ejected through the punch.
Bolt Breakers
•  Used in pairs to break off the surplus length of bolts.

Belt Lacing Tools
To Suit MP20

Manually Operated Screw Lacer 
•   The full splice width is installed progressively by pressing in 76mm long strips of fasteners.
•   The force transmitted through the lacer ensures high pressure at the lacer jaw, which is necessary to squeeze the fasteners and correctly embed them into the belt.
•   Special packing plates are available which are fitted behind the jaws for belts less than 8mm thick.

Belt Lacing Tools
To Suit ELR

Manually Operated Lever Lacer
•  The portable GEM Splicing machine is available with a comb    pitch of 7mm.  The lacer is lightweight and easy to carry to the    job site, set up and use to install the GEM ELR fastener.
 •  Our standard machine is suitable for 230mm comb lengths, and    can be manufactured to suit 460mm comb widths. (Available on    special request only.)

Belt Lacing Tools
To Suit U20

Profi 19 Vice Lacer
•  Made from high quality hardened tool steel.
 •  Designed to suit the volumes of belt lacing carried out by dealers.
 •  A splice width up to 210mm (19 fasteners) can be installed in one    step. 
•  Installation can either be performed with a hammer and manual    punch or with the U20 air hammer and punch.
 •  Wider belts are sliced by progressive step by step installation.
Portable Tool Holder for Profi 19
 •  The portable tool holder replaces the use of a vice and enables    splicing of the belts wherever its most convenient in the field or    workshop.
U20 Air Hammer
•  The air hammer and punch is an alternative to the manual punch,    making splice installation quick and easy.  Recommended for    Dealer applications.

Belt Lacing Tools
To Suit M and R Series

MA Eco-Vice Lacer
•  Low cost and easy to operate
•  Tool widths 150, 200 and 250mm
 •  Wider lacing is possible
 •  The comb is part of the tool
 •  A different tool is required for each pitch
Profi Lacer:  The Patented MATOVICE
•  Optimum fastener installation
•  Synchronised jaw pressure
 •  Jaw designed for optimum pressing forces
 •  Tool width 120mm
 •  Interchangeable UNICOMB V
 •  Tool also accepts UNICOMB R for wider lacing
Installation Machine MATOROLL
•  Interchangeable UNICOMB R
•  Machine widths 300, 600, 1000 and 1500mm
•  Wider lacing is possible
•  No vice required
•  Light-weight construction
Hydraulic Lacing Machine for Volume Lacing
•  Can be operated with an electro hydraulic drive or foot pump
•  Optimum lacing quality even on thinnest belts


Connecting Pins
To Suit Heavy Duty Fasteners

PKG
 •  Special steel cable    with armour wrap for    longest service life.     Also with a screw    thread for use with    sealed fasteners.
 •  Standard eg P3KG		 LS
•  Low cost wire    version:
   - Stainless steel      cable
PSG
 •  Stainless steel    cable with armour    wrap, also with a    screw thread for use    with sealed    fasteners.
 •  Standard: eg P3SG 		L
 •  Low cost wire    version:
   - Zinc plated cable
 
PS
• Stainless steel cable    with armour wrap.
 •  Standard: eg.P1S    		    

Connecting Pins
To Suit Medium Duty Fasteners

LS
 •  Low cost wire    version:
   - Stainless steel      cable		 K
 • Flexible connecting pins   available in coils 10 or   30m long.
 • Zinc plated spring steel
 
L
 •  Low cost wire    version:
   - Zinc plated      cable		 OK
 • Flexible connecting pins   available in coils 10 or   30m long.
 • Armoured cable (wear   resistant).

Connecting Pins
To Suit Light Duty Fasteners

Connecting Pins
• NST - Nylonsteel
 • NSS - Nylostainless
 • NY - Nylon
• NYN - Nylon notched
• WSS - Wire stainless
• WSSN - Wire stainless notched
• NC - Nylocable 
• NCS - Nylocable stainless  		- Nylon coated wire
- Nylon coated 316 SS solid wire 
- Smooth solid nylon
- Notched solid nylon
- Smooth 316 SS solid wire
- Notched 316 SS solid wire
- Nylon coated zinc plated cable   
- Nylon coated 316 SS cable


Additional Products
Belt Cutters

T Square
• The MATO square is used in conjunction with    the belt knife for cutting the belt end square to    the edge of the belt.  The squaring angle    contains a slot to guide the knife blade; this    facilitates a straight cut and safe operation of    the knife.
MR Type Cutter
•  Can be used for belts up to 19mm thick and is    available in standard sizes of 900, 1200 and    1500mm width.
 
Heavy Duty Cutter
•  Can be used for belts 15-30mm thick and is    available in standard sizes of 1200, 1500 and    1800mm width.

Hand Tools

Belt Marker Belt Thickness Indicator
0-30mm
Belt Knife Belt Marking Pen -Silver
Hammer H1 Staple Gun
Levelling Knife Optimat Wire Cutter


Skivers

Belt Skiver
Suits U60, U30, S30, E30 series fasteners

•  If the belt cover is 2mm or thicker it is recommended to skive    leaving 1-1.5mm of cover over the carcass.  The belt skiver is    used on the clamping frame of the belt lacing machine.
 •  Various skiver blades are available for differing belt thicknesses.
Hand Skiver
 Suits H30, MP20, ELR, U20 series fasteners

• This skiver is a quick and easy tool for rebating the belt, allowing    the fasteners to lie flush with the belt surface. This reduces wear    between fasteners and scrapers resulting in longer lifetime of    both.


Handsaver

Handsaver
•  Provides a safe and comfortable method of handling awkward     objects and saves trapped fingers and cut hands.
•  Flats, channels, angles, tubes, rounds, H sections, conveyor    belting may all be lifted and dragged easily, safely and quickly    with this versatile tool.
 •  Corrosion resistant finish.

Wavemaster

Wave and Bow Stop
•  Use the patented MATO system to prevent waves and bows in    the belt.  The tensioned wire rope will eliminate edge stress,    improve connection of the two spliced belt ends and minimise    scraper wear.
•  Different versions available for belts up to 1600kN/m.

Hammer Pin Driver

Hammer Pin Driver
 •  Using the hammer pin driver the MATO connecting pins can be     installed easily and without damage.

Manual Screw Pin Insertion Tool

Screw Pin Insertion Tool
The screw connecting pin can be installed quickly and easily using the:
 •  Manual insertion tool for screw connecting pin.
 

Pneumatic Screw Pin Insertion Tool
Screw Pin Insertion Tool
The screw connecting pin can be installed quickly and easily using the:
 •  Pneumatic insertion tool for screw connecting pin
top